Owner's Guide
Amped Maintenance Guide
Quick answer: Amped bikes are designed to be low maintenance, but regular cleaning, battery care, chain lubrication and routine safety checks will help keep your bike running reliably for years.
Whether you own an Amped A10, A16, A16 Pro, A20, A20 Pro or one of the Comp models, following a simple maintenance routine can improve reliability, performance and component lifespan.
Quick Maintenance Checklist
- Check tyres before every ride
- Inspect brakes regularly
- Keep the chain clean and lubricated
- Check nuts and bolts periodically
- Store batteries correctly
- Clean the bike after muddy rides
- Inspect tyres for wear and damage
- Charge batteries correctly
My Advice as a British MX Rider
Most electric bike problems come from neglect rather than actual faults.
Five minutes spent checking the bike after a ride is usually worth more than a major clean once every few months.
Keep it clean, look after the battery and check bolts regularly. Those three things alone will prevent most issues.
How Often Should You Maintain an Amped Bike?
For most families, Amped bike maintenance is simple.
A quick visual inspection before riding and a more thorough check every few weeks is normally enough for recreational use.
If the bike is ridden regularly on tracks, trails or rough terrain, inspections should be carried out more frequently.
Battery Care
The battery is one of the most important components on any Amped bike.
Looking after the battery properly can significantly improve lifespan and long-term performance.
Battery Care Tips
- Always use the correct charger
- Avoid storing batteries completely flat
- Store indoors where possible
- Avoid extreme heat or cold
- Disconnect chargers once charging is complete
- Check battery charge periodically during long storage periods
Correct battery care is one of the easiest ways to maximise the life of your Amped bike.
Chain Maintenance
Many Amped bikes use chains that require basic maintenance.
A clean and lubricated chain improves efficiency and reduces wear.
Chain Care Checklist
- Remove dirt and mud after riding
- Apply suitable chain lubricant regularly
- Check chain tension periodically
- Inspect for excessive wear
- Replace worn chains when necessary
Chain maintenance only takes a few minutes but can significantly extend component life.
Brake Maintenance
Brakes should always be inspected regularly, especially if the bike is used off-road.
- Check brake function before riding
- Inspect brake pads for wear
- Ensure levers operate smoothly
- Investigate unusual noises immediately
- Replace worn components promptly
Reliable brakes are essential for rider confidence and safety.
Tyres & Wheels
Tyres have a major effect on grip, comfort and handling.
- Inspect for cuts and damage
- Check tyre pressures regularly
- Replace excessively worn tyres
- Inspect wheel fasteners periodically
Correct tyre pressures can also improve battery efficiency and ride quality.
Cleaning Your Amped Bike
Keeping an Amped bike clean makes it easier to identify wear, loose fasteners and potential issues before they become larger problems.
Recommended Cleaning Process
- Brush off loose mud and dirt.
- Wash using mild soap and water.
- Avoid pressure washers near bearings or electrical components.
- Dry thoroughly after cleaning.
- Lubricate the chain after washing.
Avoid directing water at charging ports, electrical connectors or battery components.
Checking Nuts & Bolts
Off-road riding naturally creates vibration.
Periodically inspect:
- Handlebar clamps
- Brake fasteners
- Wheel fasteners
- Suspension mounting bolts
- Footrests and controls
Loose fasteners should be tightened according to manufacturer recommendations.
Storage Advice
If the bike will not be used for several weeks or months:
- Store indoors where possible
- Clean thoroughly before storage
- Charge the battery beforehand
- Check charge levels periodically
- Keep tyres inflated
Correct storage helps prevent unnecessary wear and battery deterioration.
Common Maintenance Mistakes
- Leaving batteries flat for long periods
- Ignoring chain maintenance
- Using pressure washers on electrical components
- Riding with loose bolts
- Ignoring worn brake pads
- Storing bikes outside permanently
How Reliable Are Amped Bikes?
Amped bikes are generally very reliable when maintained correctly.
The simple electric drivetrain means there are fewer maintenance requirements than a comparable petrol bike.
Most routine maintenance revolves around batteries, chains, brakes, tyres and general inspections.
Our Maintenance Advice
Little and often works best.
A quick inspection after riding is usually enough to keep an Amped bike running properly.
Most maintenance jobs take only a few minutes and can prevent more expensive repairs later.
Frequently Asked Questions
Do Amped bikes need much maintenance?
No. Compared with petrol bikes, Amped bikes require very little maintenance. Most routine care involves battery management, chain lubrication and safety checks.
How often should I lubricate the chain?
This depends on riding conditions, but regular lubrication after muddy or wet rides is recommended.
Can I pressure wash an Amped bike?
We generally recommend avoiding pressure washers around electrical components, bearings and charging ports.
How long do Amped batteries last?
Battery lifespan varies depending on usage and charging habits, but correct charging and storage can significantly extend battery life.
Should I store my Amped bike indoors?
Yes. Indoor storage helps protect batteries, electrical components and metal parts from weather-related deterioration.